Category: Packaging Tips

You can pick the perfect box and the strongest tape, but if your pallet loads aren’t strapped correctly, product still arrives crushed, shifted, or scattered across a trailer floor. Strapping (also called banding) is the workhorse that holds palletized freight together through forklifts, dock drops, and long highway miles. Here’s a practical rundown of the strapping types, tools, and techniques that keep Chicagoland shipments intact.

The three main types of strapping

Most warehouses run one of three materials, and choosing the right one comes down to load weight and how much “give” you need.

• Polypropylene (PP) — The lightweight, economical choice for bundling, carton closing, and light unitizing. It stretches and recovers a little, which is fine for light to medium loads but not for anything heavy or sharp-cornered.
• Polyester (PET) — The strongest plastic strapping, with high retained tension. PET is the go-to replacement for steel on most palletized loads because it absorbs impact and keeps tension as the load settles.
• Steel — Reserved for the heaviest, rigid, sharp-edged, or high-temperature loads like coils, bar stock, and metal castings. It has almost no stretch, so it holds rigid freight tightly but can snap under sudden impact.

Match the strap to the load

Strapping is rated by width, thickness, and break strength. A common mistake is over-buying strength you don’t need, or worse, under-strapping a heavy pallet to save a few dollars. As a general guide: light bundling jobs do well with 3/8″ to 1/2″ polypropylene, medium pallet loads with 1/2″ to 5/8″ polyester, and heavy industrial freight with 5/8″ or wider polyester or steel. When in doubt, factor in load weight, edge sharpness, transit distance, and how much the load might settle in transit.

Don’t forget the tools and accessories

Strapping only works as well as the tools tensioning it. You’ll need a tensioner to pull the strap tight, a sealer or buckles (for steel and some PP), and either metal seals or a friction-weld/battery-powered tool for plastic strapping. Battery-powered combination tools tension and weld in one step and are a major time-saver for high-volume lines. Just as important are edge protectors, which spread strap tension across box corners so the band doesn’t cut into your cartons or product.

Strapping technique that actually holds

• Apply at least two straps per pallet, more for tall or unstable loads, and run them over the corners where the load is most likely to shift.
• Use edge protectors on every corner the strap crosses.
• Tension consistently. Too loose and the load shifts; too tight and you crush the product.
• Combine strapping with stretch film for unitizing. Film contains the load, strapping anchors it to the pallet.
• Inspect seals and welds. A bad joint is the most common failure point.

Stock it before you need it

Running out of strapping mid-shift stops your dock cold. That’s where a local supplier matters: KMS Distributing stocks polypropylene and polyester strapping, seals, buckles, tensioners, edge protectors, and the rest of your unitizing supplies for warehouses across Chicagoland. If your loads are unusual or high-volume, ask about bulk ordering to lock in pricing and keep your line stocked. You can also browse the full catalog of strapping and packaging gear in our online shop.

Need strapping, tools, or a full unitizing setup fast? Call KMS Distributing at (847) 630-7502, email orders@kmsdistributing.com, or browse 20,000+ products at our online shop. Enjoy free Chicagoland delivery on orders over $1,000, with most in-stock orders placed before noon arriving the next business day.

If your carrier invoices keep climbing even though your products haven’t gotten any heavier, dimensional weight is probably the culprit. Carriers bill on whichever is greater: a package’s actual weight or its dimensional (DIM) weight, calculated from its size. Ship a lightweight product in an oversized box and you pay for air. Here’s how dimensional weight works and seven practical ways to stop overpaying for it.

How Dimensional Weight Is Calculated

Multiply your package’s length by width by height in inches, then divide by the carrier’s DIM divisor. Major carriers commonly use a divisor of 139 for standard shipments. A box measuring 18 x 14 x 12 inches comes to 3,024 cubic inches; divide by 139 and you get a billable weight of about 22 pounds, even if the contents weigh five. The carrier charges you for 22. That gap between actual and billable weight is money you can recover with smarter packaging.

7 Ways to Reduce DIM Weight Charges

1. Right-size your boxes. The single biggest lever. Every inch of empty space is billable air. Matching the carton to the product is where most of the savings live.
2. Order custom box sizes. When stock dimensions force you into a box that’s too big, a custom box built to your exact product dimensions eliminates the wasted volume for good.
3. Cut down on void fill. A smaller box needs less bubble, foam, or paper to fill it, so you save twice: on the cushioning material and on the DIM weight.
4. Use mailers and poly bags for soft goods. Apparel, textiles, and other non-fragile items don’t need a rigid box. A poly mailer collapses to the size of its contents and almost always bills at actual weight.
5. Keep a tighter range of box sizes. A well-chosen set of cartons lets packers pick the closest fit instead of defaulting to whatever oversized box is on the shelf.
6. Audit your most-shipped SKUs. Identify your top items by volume and optimize their packaging first. Small per-box savings multiply fast across thousands of shipments.
7. Flatten and fold where you can. Reducing any one dimension lowers the cubic total. Sometimes laying a product flat instead of standing it upright drops you into a lower billable tier.

Right-Sizing Pays Off Beyond Shipping

Smaller, well-fitted packaging doesn’t just cut DIM charges. It lowers material costs, speeds up packing, reduces product damage from shifting in transit, and trims storage space for your flattened carton inventory. For Chicagoland businesses shipping hundreds or thousands of parcels a month, dialing in box sizes is one of the highest-return packaging projects you can take on.

Not sure which sizes fit your products best? We stock a wide range of corrugated boxes and can quote custom sizes and bulk quantities to match exactly what you ship. Browse our full catalog of 20,000+ packaging products or call us to talk through your most-shipped items.

Ready to stop paying for air? Call KMS Distributing at (847) 630-7502, email orders@kmsdistributing.com, or browse 20,000+ products at kmsdistributors.com/Shop. We offer free Chicagoland delivery on orders over $1,000, and most in-stock orders placed before noon ship next business day.

If your carrier invoices keep climbing even though your products haven’t gotten any heavier, dimensional weight is probably the culprit. Carriers bill on whichever is greater: a package’s actual weight or its dimensional (DIM) weight, calculated from its size. Ship a lightweight product in an oversized box and you pay for air. Here’s how dimensional weight works and seven practical ways to stop overpaying for it.

How Dimensional Weight Is Calculated

Multiply your package’s length by width by height in inches, then divide by the carrier’s DIM divisor. Major carriers commonly use a divisor of 139 for standard shipments. A box measuring 18 x 14 x 12 inches comes to 3,024 cubic inches; divide by 139 and you get a billable weight of about 22 pounds, even if the contents weigh five. The carrier charges you for 22. That gap between actual and billable weight is money you can recover with smarter packaging.

7 Ways to Reduce DIM Weight Charges

1. Right-size your boxes. The single biggest lever. Every inch of empty space is billable air. Matching the carton to the product is where most of the savings live.
2. Order custom box sizes. When stock dimensions force you into a box that’s too big, a custom box built to your exact product dimensions eliminates the wasted volume for good.
3. Cut down on void fill. A smaller box needs less bubble, foam, or paper to fill it, so you save twice: on the cushioning material and on the DIM weight.
4. Use mailers and poly bags for soft goods. Apparel, textiles, and other non-fragile items don’t need a rigid box. A poly mailer collapses to the size of its contents and almost always bills at actual weight.
5. Keep a tighter range of box sizes. A well-chosen set of cartons lets packers pick the closest fit instead of defaulting to whatever oversized box is on the shelf.
6. Audit your most-shipped SKUs. Identify your top items by volume and optimize their packaging first. Small per-box savings multiply fast across thousands of shipments.
7. Flatten and fold where you can. Reducing any one dimension lowers the cubic total. Sometimes laying a product flat instead of standing it upright drops you into a lower billable tier.

Right-Sizing Pays Off Beyond Shipping

Smaller, well-fitted packaging doesn’t just cut DIM charges. It lowers material costs, speeds up packing, reduces product damage from shifting in transit, and trims storage space for your flattened carton inventory. For Chicagoland businesses shipping hundreds or thousands of parcels a month, dialing in box sizes is one of the highest-return packaging projects you can take on.

Not sure which sizes fit your products best? We stock a wide range of corrugated boxes and can quote custom sizes and bulk quantities to match exactly what you ship. Browse our full catalog of 20,000+ packaging products or call us to talk through your most-shipped items.

Ready to stop paying for air? Call KMS Distributing at (847) 630-7502, email orders@kmsdistributing.com, or browse 20,000+ products at kmsdistributors.com/Shop. We offer free Chicagoland delivery on orders over $1,000, and most in-stock orders placed before noon ship next business day.

Choosing the wrong void fill is an easy way to either trash your products in transit or torch your margins on materials and shipping. Empty space inside a box lets contents shift, and shifting is what cracks, dents, and scuffs goods on the way to your Chicagoland customers. The three workhorses of void fill are bubble cushioning, foam, and paper. Each has a job it does well. Here is how to match the material to the shipment.

Bubble cushioning: the all-rounder

Bubble is the default for a reason. The trapped air gives you a springy buffer that absorbs shock, and it conforms loosely around odd shapes. It is light, so it adds almost nothing to your dimensional weight, and it is fast to apply once your packing station has a roll mounted within reach.

Reach for bubble when you are wrapping individual items that need surface protection, such as glassware, framed goods, electronics housings, or anything with a finish that scratches. Small-bubble grades cushion light items and fill thin gaps. Large-bubble grades handle bigger voids and heavier loads. The one downside is that loose bubble compresses over a long haul, so it is not your best pick when a box will be stacked under heavy weight for days.

Foam: maximum protection for fragile and high-value goods

Foam is what you use when the item absolutely cannot move and the cost of a damaged return dwarfs the cost of materials. Foam sheeting protects soft surfaces and finishes. Foam pouches slip over small components. Foam planks and corner pieces immobilize heavy or angular products inside a box. For repeat shipments of the same item, custom-cut foam inserts hold the product in a fixed cradle so it survives rough handling every time.

The trade-offs are cost and bulk. Foam runs more per shipment than bubble or paper, and it takes up storage space at your facility. Save it for electronics, instruments, medical devices, and anything fragile and expensive enough to justify the spend.

Paper: clean, recyclable gap fill

Kraft paper and crumpled void-fill paper shine at one job: filling empty space so contents do not slide. It is curbside recyclable, it presents well in an unboxing, and customers do not have to feel guilty throwing it out. Paired with a dispenser, paper packs gaps quickly and keeps a station tidy.

Paper is best for non-fragile or already-boxed items where you mainly need to take up slack, such as books, tools, bottled goods in their own packaging, or kitted orders. It offers less shock absorption than bubble or foam, so it is gap fill rather than true cushioning. For fragile items, combine a paper fill with a bubble wrap on the item itself.

How to choose at a glance

• Surface scratches a concern, light to medium weight: bubble cushioning.
• Fragile, high-value, or repeat shipments that must not shift: foam.
• Sturdy items that just need slack taken up, recyclability matters: paper.
• Genuinely fragile in a loose box: wrap the item in bubble, then fill remaining gaps with paper.

One more cost lever worth pulling: the less void you have to fill, the less you spend on material and the lower your dimensional weight. Right-sizing the box is the cheapest cushioning decision you can make. If stock sizes leave you packing fistfuls of fill into half-empty cartons, a tighter box pays for itself fast. That is where custom boxes and bulk orders come in, and our team can help you spec the right size and the right fill together so you are not over-buying either one.

Want to compare grades side by side? Browse bubble, foam, and paper void fill among our 20,000+ products at our online store, or call us and we will point you to the right material for what you ship.

Ready to dial in your packaging? Call KMS Distributing at (847) 630-7502, email orders@kmsdistributing.com, or browse 20,000+ products at www.kmsdistributors.com/Shop. Enjoy free Chicagoland delivery on orders over $1,000, with most in-stock orders placed before noon arriving the next business day.

If your warehouse team spends too much time squinting at labels, double-checking destinations, or pulling the wrong cartons off a pallet, a simple fix may already be sitting in your tape dispenser. Custom color tape turns an everyday supply into a visual system your whole crew can read at a glance. For busy Chicagoland operations, that small change can mean fewer mistakes, faster picks, and smoother shipping days.

What Is Custom Color Tape?

Custom color tape is standard carton sealing tape produced in solid colors or printed with your own text, logo, or instructions. Instead of plain tan or clear tape, you get rolls in red, blue, green, yellow, and other shades, or printed messages like “FRAGILE,” “THIS SIDE UP,” or your company name. The adhesive and strength are the same as the packing tape you already use. The difference is the information it carries before anyone reads a single word.

Why Color-Coding Works on the Warehouse Floor

People process color faster than text. When a forklift operator can spot a red-taped pallet from across the dock, they do not need to stop, read, and interpret. The color does the work. That speed adds up across hundreds of cartons a day, and it cuts the kind of errors that lead to returns, reships, and unhappy customers.

Here are common ways operations put color tape to work:

• By destination or carrier: Assign a color to each carrier or region so staging is faster and the wrong truck never gets the wrong freight.
• By department or product line: Separate orders by team, customer, or category without printing extra paperwork.
• By priority: Reserve one color for rush and same-day orders so they never get buried in the queue.
• By handling needs: Use printed “FRAGILE” or “HEAVY” tape to flag special handling before a box is even lifted.

Setting Up a Color System That Sticks

The best systems are simple enough that a new hire learns them on day one. Keep these points in mind:

• Limit yourself to four or five colors. Too many shades blur together and defeat the purpose.
• Pick colors that contrast clearly under your lighting, and avoid pairings that are hard to tell apart.
• Post a small color key at each packing station so the meaning is never in question.
• Standardize across shifts so the night crew and the day crew read the same language.

Printed tape takes the idea one step further. A roll that repeats your logo or a clear instruction reinforces your brand on every outbound box and reduces the need for separate stickers and stamps.

Choosing the Right Tape for the Job

Color is only useful if the tape actually holds. Match the tape grade to your cartons and conditions. Heavier boxes and recycled corrugated usually call for a thicker acrylic or hot-melt tape, while cold storage and Midwest winter shipping need an adhesive rated to perform in low temperatures. If you are not sure which grade fits, it pays to ask a supplier who stocks the full range rather than guessing and dealing with seams that pop open in transit.

Custom color and printed tape are usually ordered in bulk and quoted by the run, so it helps to plan your colors and quantities up front. KMS Distributing handles custom and printed tape as one of our specialties, and you can see the broader tape selection along with more than 20,000 other products in our online shop. For pricing on a custom color or printed run, our custom and bulk order team can walk you through the options.

Ready to color-code your warehouse? Call KMS Distributing at (847) 630-7502, email orders@kmsdistributing.com, or browse 20,000+ packaging products at our online shop. We offer free Chicagoland delivery on orders over $1,000, with most in-stock orders placed before noon delivering the next business day.

If your warehouse team spends too much time squinting at labels, double-checking destinations, or pulling the wrong cartons off a pallet, a simple fix may already be sitting in your tape dispenser. Custom color tape turns an everyday supply into a visual system your whole crew can read at a glance. For busy Chicagoland operations, that small change can mean fewer mistakes, faster picks, and smoother shipping days.

What Is Custom Color Tape?

Custom color tape is standard carton sealing tape produced in solid colors or printed with your own text, logo, or instructions. Instead of plain tan or clear tape, you get rolls in red, blue, green, yellow, and other shades, or printed messages like “FRAGILE,” “THIS SIDE UP,” or your company name. The adhesive and strength are the same as the packing tape you already use. The difference is the information it carries before anyone reads a single word.

Why Color-Coding Works on the Warehouse Floor

People process color faster than text. When a forklift operator can spot a red-taped pallet from across the dock, they do not need to stop, read, and interpret. The color does the work. That speed adds up across hundreds of cartons a day, and it cuts the kind of errors that lead to returns, reships, and unhappy customers.

Here are common ways operations put color tape to work:

• By destination or carrier: Assign a color to each carrier or region so staging is faster and the wrong truck never gets the wrong freight.
• By department or product line: Separate orders by team, customer, or category without printing extra paperwork.
• By priority: Reserve one color for rush and same-day orders so they never get buried in the queue.
• By handling needs: Use printed “FRAGILE” or “HEAVY” tape to flag special handling before a box is even lifted.

Setting Up a Color System That Sticks

The best systems are simple enough that a new hire learns them on day one. Keep these points in mind:

• Limit yourself to four or five colors. Too many shades blur together and defeat the purpose.
• Pick colors that contrast clearly under your lighting, and avoid pairings that are hard to tell apart.
• Post a small color key at each packing station so the meaning is never in question.
• Standardize across shifts so the night crew and the day crew read the same language.

Printed tape takes the idea one step further. A roll that repeats your logo or a clear instruction reinforces your brand on every outbound box and reduces the need for separate stickers and stamps.

Choosing the Right Tape for the Job

Color is only useful if the tape actually holds. Match the tape grade to your cartons and conditions. Heavier boxes and recycled corrugated usually call for a thicker acrylic or hot-melt tape, while cold storage and Midwest winter shipping need an adhesive rated to perform in low temperatures. If you are not sure which grade fits, it pays to ask a supplier who stocks the full range rather than guessing and dealing with seams that pop open in transit.

Custom color and printed tape are usually ordered in bulk and quoted by the run, so it helps to plan your colors and quantities up front. KMS Distributing handles custom and printed tape as one of our specialties, and you can see the broader tape selection along with more than 20,000 other products in our online shop. For pricing on a custom color or printed run, our custom and bulk order team can walk you through the options.

Ready to color-code your warehouse? Call KMS Distributing at (847) 630-7502, email orders@kmsdistributing.com, or browse 20,000+ packaging products at our online shop. We offer free Chicagoland delivery on orders over $1,000, with most in-stock orders placed before noon delivering the next business day.

Stretch film and shrink wrap look similar on the roll, and plenty of warehouse teams use the terms interchangeably. They are not the same product, and using the wrong one costs money in damaged loads, wasted film, or equipment you didn’t need to buy. Here’s how the two differ and how to decide which belongs in your Chicagoland warehouse.

What Is Stretch Film?

Stretch film is an elastic plastic film, usually linear low-density polyethylene (LLDPE), that you stretch around a load. The film’s elastic recovery is what holds the load tight: as it tries to return to its original size, it clamps cartons to the pallet. No heat is involved.

Stretch film comes in two main forms:

• Hand film – shorter rolls with extended cores or handles, applied by a person walking the pallet. Right for operations wrapping a few dozen pallets a day or less.
• Machine film – longer, heavier rolls designed for turntable or rotary-arm wrappers. Machines pre-stretch the film up to 250 percent, so you use far less material per pallet.

What Is Shrink Wrap?

Shrink wrap (or shrink film) is typically polyolefin or PVC film that is loose when applied and then shrunk tight with heat from a heat gun or shrink tunnel. As the film shrinks, it conforms to the exact shape of the item underneath.

That heat step is the key difference. Shrink wrap requires heat equipment, but in return it gives you a tight, sealed, often retail-ready package. Think gift baskets, multipacks of bottles or cans, boxed software, frozen pizzas, and printed pieces that need to arrive clean.

When to Use Stretch Film

• Pallet unitizing. Securing cartons to a pallet for truck shipment is stretch film’s home turf. It’s faster and far cheaper per pallet than any heat-based option.
• Mixed or irregular loads. Elastic film conforms to uneven stacks and keeps them from shifting in transit.
• Warehouse moves and storage. Wrapping shelving carts or bundling long items like trim and pipe.
• Loads that need ventilation. Vented stretch film lets produce or hot-filled product breathe while staying secure.

When to Use Shrink Wrap

• Retail presentation. Shrink wrap gives a glossy, tamper-evident finish that stretch film can’t match.
• Bundling multipacks. Two-packs and six-packs headed to store shelves.
• Protection from moisture and dust. A fully sealed shrink bag keeps out the elements – useful for long-term storage and for anything shipped through a Midwest winter.
• Odd-shaped single items. The film conforms to the product, not the other way around.

Cost Considerations

For pallet shipping, stretch film almost always wins on total cost. There’s no heat equipment to buy or power, and machine pre-stretch dramatically lowers film cost per pallet. The most common mistake we see is the opposite problem: buying a heavier-gauge film than the load needs. Many loads wrapped in 80-gauge film ride just as safely in a high-performance 63-gauge film, which cuts film spend roughly 20 percent. If you’re not sure what gauge fits your loads, that’s a five-minute conversation with a supplier who handles both – call us at (847) 630-7502 and we’ll walk through it.

Shrink wrap earns its higher cost when packaging appearance or a sealed barrier directly affects how your product sells or survives. Don’t pay for a shrink tunnel to do a stretch wrapper’s job.

Stocking Both? Buy in Bulk

Most operations end up using both films somewhere in the building. Because film is a consumable you’ll never stop ordering, it’s one of the best candidates for bulk ordering – pallet quantities lock in lower per-roll pricing and keep you from emergency-buying at retail prices when a roll runs out mid-shift. KMS Distributing stocks stretch film, shrink film, and dispensing equipment from brands like Sealed Air and Tape Logic among 20,000+ products in our online catalog, and most in-stock orders placed before noon deliver anywhere in Chicagoland the next business day.

The Quick Rule of Thumb

Securing a pallet? Stretch film. Sealing and presenting a product? Shrink wrap. If your application falls somewhere in between, or you want a second opinion on film gauge and equipment before your next bulk order, we’re happy to help you spec it.

Ready to stock up? Call KMS Distributing at (847) 630-7502, email orders@kmsdistributing.com, or browse 20,000+ products at kmsdistributors.com/Shop – with free Chicagoland delivery on orders over $1,000.

Pick the wrong box and you pay twice: once for the box, and again for the damaged product inside it. Pick a box that is too heavy-duty and you are quietly overpaying on every single shipment. Here is how to get it right.

Start With the Right Size

A box should fit your product with just enough room for cushioning — usually about two inches on each side for fragile items. Too much empty space means more void fill, more dimensional weight charges from carriers, and more product movement in transit. Too little space means your cushioning cannot do its job.

Remember that corrugated box dimensions are always internal dimensions, listed as length × width × depth. Measure your product, add cushioning allowance, and you have your box size.

Understand Box Strength Ratings

Most stock corrugated boxes carry one of two ratings:

• ECT (Edge Crush Test) — how much stacking pressure a box can take. A 32 ECT box is the everyday standard for shipments up to roughly 65 lbs.
• Mullen (Burst) Test — how much puncture pressure the box wall withstands, useful when boxes are handled roughly in parcel networks.
• Wall count — single wall covers most shipments; double and triple wall are for heavy, dense, or industrial products.

Match the Flute to the Job

The wavy layer inside corrugated board is the flute. C flute is the common all-purpose choice. B flute is thinner with better print surface and die-cut performance, which is why mailers often use it. E and F flutes are thin and rigid — great for retail packaging. A and double-wall combinations add stacking strength and cushioning for heavy goods.

When Stock Boxes Stop Making Sense

If you are stuffing products into boxes that are close-but-not-quite, paying for excess void fill, or taping two boxes together (we have seen it), it is time to look at a custom box. A made-to-order box sized exactly to your product usually pays for itself in reduced damage, less fill material, and lower dimensional-weight shipping charges.

Need help picking the right packaging — or pricing a custom or bulk order? Call KMS Distributing at (847) 630-7502, email orders@kmsdistributing.com, or browse 20,000+ products in our online catalog. Learn more about custom boxes and bulk orders.

Stock boxes are great until they are not. Every operation eventually hits a product that no standard size fits: too long, too flat, too fragile, or just expensive enough that you want the packaging to sell the brand, not fight it. That is when custom corrugated earns its keep.

Signs You Have Outgrown Stock Boxes

• You are paying to ship air because the nearest stock size is two inches too big in every direction.
• Damage claims keep coming from the same product line.
• Your team spends time building out boxes with filler, inserts, or extra tape.
• You want printed packaging that carries your brand instead of a plain kraft box.
• Your product dimensions changed and 4,000 leftover boxes no longer fit anything.

What You Can Customize

Far more than size. A custom corrugated program can specify board grade and wall count for the exact weight you ship, interior partitions or die-cut inserts to stop movement, box styles from regular slotted cartons to die-cut mailers and telescoping designs, and printing from a one-color logo stamp to full branding.

What About Cost?

Custom boxes are usually more economical than people expect — especially at volume. Pricing depends on dimensions, board grade, print, and quantity, and material costs move over time. That is exactly why we quote custom work by phone rather than posting static prices: a two-minute call gets you a current, exact number instead of a guess.

How Ordering Works at KMS

Call (847) 630-7502 and tell us what you ship, the dimensions, and roughly how many you need. We come back with the right box style, board grade, and an exact quote — including volume pricing tiers. Approve it, and your boxes ship to your dock. Reorders take one phone call.

Need help picking the right packaging — or pricing a custom or bulk order? Call KMS Distributing at (847) 630-7502, email orders@kmsdistributing.com, or browse 20,000+ products in our online catalog. Learn more about custom boxes and bulk orders.

Packaging is one of the easiest line items to shrink — not by buying cheaper materials, but by buying smarter quantities. Here are five ways bulk ordering pays off.

1. Volume Pricing on Every Unit

The most obvious win: pallet- and truckload-quantity orders earn meaningful per-unit discounts on boxes, tape, stretch film, poly bags, and just about everything else in the warehouse. If you are reordering the same supplies every few weeks at list price, you are leaving money on the table.

2. Fewer Freight Charges

Ten small orders mean ten shipping charges. One consolidated bulk order means one. Freight on packaging adds up faster than most buyers track, especially on bulky items like boxes and bubble.

3. No More Emergency Buys

Running out of carton-sealing tape on a Friday afternoon leads to paying retail at the nearest big-box store. Bulk stock plus a recurring supply program means your line never stops and you never panic-buy.

4. Less Purchasing Overhead

Every purchase order, invoice, and receiving event costs staff time. Consolidating packaging into fewer, larger orders from a single supplier cuts the administrative drag — one vendor, one invoice, one delivery to receive.

5. Price Stability

Packaging materials are commodities, and commodity prices move. Buying in volume lets you lock pricing for a defined quantity instead of riding every market bump on small reorders.

How to Get Bulk Pricing From KMS

Bulk pricing depends on quantity and current material costs, so we quote it personally. Call (847) 630-7502 with your item list and monthly usage, and we will put together volume pricing — and tell you honestly where bulk makes sense and where it does not.

Need help picking the right packaging — or pricing a custom or bulk order? Call KMS Distributing at (847) 630-7502, email orders@kmsdistributing.com, or browse 20,000+ products in our online catalog. Learn more about custom boxes and bulk orders.